Thermal Printhead Cleaners

The New Waffletechnology 4 inchThermal Printer Cleaning Cards with Wonder Solvent IPA Free Cleaning Solution was designed for the most superior clean
Waffletechnology raised & spring loaded platforms are used to reach the Print Heads leading edge and provide enough tension to rotate the platen for a full circumference clean
IPA Free solution proves better for cleaning the entire print head, platen rollers and rubber components
Does not dry belts and drive rollers. (Cleaning Card with 3 Cleaning Layers)
Pack of 15 cards (100 x 152mm) individually wrapped
More Information on Printhead Cleaning Cards

This Dual Action Cleaning Pen is a two-step process designed to remove adhesive build up then clean ink, dirt and contaminants from thermal print heads
Step 1 removes adhesive build up from thermal print heads while
Step 2 cleans the print head to maintain a crisp, legible image
Use this reusable product before every media change or when visible print imperfections occur
Pack of 10 pens

This thermal printer cleaning pen is designed to use on thermal printers that have an accessible print head
In short, the printer can be easily opened and the print head itself is exposed
Adding a little pressure as you move the pen across the print head will gently scrub off the burnt on particles
The heat from the clean print head can then transfer to the print media
The cleaning pen barrel contains 99.7%, IPA the recommended cleaning solution by thermal printer manufacturers
It is recommended by thermal printer manufacturers to clean the print head with every change of paper or label stock for crisp printed material
Pack of 12 pens

This thermal printer cleaning wipe is designed to use on thermal printers that have an accessible print head
The EZ Wipe has the added benefit of cleaning platen rollers and other interior or exterior surfaces of the printer
The cleaning wipes are saturated with 99.7% IPA, the recommended cleaning solution by thermal printer manufacturers
Adding a little pressure as you move the wipe across the print head will gently scrub off the burnt on particles
The heat from the clean print head can then transfer to the print media
It is recommended by thermal printer manufacturers to clean the print head with every change of paper or label stock for crisp printed material
Pack of 100 wipes individually packed

Use Versawipes to keep your thermal print heads, platen, rollers and label sensors clean and healthy.
Printer manufacturers recommend regular cleaning to remove any residue caused by label dust, adhesive and dirt. Regular cleaning will enhance the life of the print heads.
Special formulation for maximum cleaning power.
Each tub contains 100 wipes.

Printers, copiers and fax machines accumulate paper flash, dirt and debris, as well as pollutants from the environment
These contaminants cause poor or illegible prints, copies and faxes
EZ Printer/Copier/Fax Cleaner Sheets will clean the paper path and rollers within the equipment, helping to extend the life of toner and ink cartridges
When used as a consistent maintenance product (each time you change toner or ink cartridge), this product will keep your equipment performing as designed
Pack of 5 sheets